Travertine naturally has holes as it is spongy due to its formation process. Its porosity is evident on the surface, but designers and stone experts create a rustic look and a terrestrial finish for the unfilled travertine.
This natural stone’s distinct characteristics make it both delicate and durable, depending on the care and use. Like other natural stones, travertine is prone to damages when mishandled.
Page Contents
Grinding, Honing, and Polishing
Source: tilecleaning.co.uk
The key techniques used to achieve the look you want for your travertine are grinding, polishing, and finishing. These procedures give your travertine the perfect finish when done by experts. The processes help in clearing wear patterns, scratches, etch, and spots to producing a smooth or glossy touch.
Correct installation and maintenance play a huge role in protecting travertine floors. Ensure that the stone is well-screened when installed and maintained throughout. But there is always the danger of something going wrong, whether wear and tear or unavoidable accidents. Stone experts can advise on the best way to repair and install travertine surfaces.
Repairing and Reinstalling
Source: cleanimageoforlando.com
It is cumbersome to patch broken tiles, whether single or several. Travertine is as reliable and flexible as any other stone material. Since travertine is long-lasting and dense, it makes an ideal alternative for high-traffic areas.
Depending on the quality, it is easier to fix the individual tile when looking at the flooring state if there is no tiles replacement. It would help if you prepared the crack by evening and lift it a little so that the epoxy or caulk has something to hold on to. This makes the cracks suit and the material that you use adhere to the sides. The next thing to do is apply caulk or epoxy to the holes. You may want to make sure you pick a filler that suits your travertine tile perfectly for smooth repair.
Follow manufacturers’ instructions when preparing material to fill the cracks, whether it is mixing the epoxy or caulk for its preparation. Next, press the epoxy into the gap and use a toothpick to force the substance down into it to ensure that it fills the crack. Caulk or epoxy flows over like a knife, razor blade, or humid rag. If the gap is filled, remove the excess epoxy or caulk when the tile surface is high, then let it dry overnight. Also, when fixing it, don’t let anyone step on it. When the epoxy or caulk dries, the cracks seal. Travertine maintenance requires frequent washing.
While the colours may appear similar, the stone differs from one piece to another. Although the colour you have put will still be available, it will be a different tiles batch. Thankfully, only the most trained eye may know the difference. If you contract the right person for the job, your surface will remain seamless and impressive eve after repair.
Though replacement of the travertine tiles is not a complicated process, leave it for professional who can handle the job with little or no further damages. Check for any wet area beneath the membrane and repair as needed.
Maintenance Practices
Source: tiledoctor.biz
While you can restore individual tiles and replace them, good care and maintenance is crucial.
Try and restore stained travertine floors. The restoration of the travertine tile cleanses any soil and grain that has accumulated over the years. Travertine stones finishes, tough strong are delicate, and exposure to elements like citrus and moisture can ruin your surfaces. Cover the surfaces to avoid discolouring and damages.
Sweep with a stiff broom any loose dust and debris off the surface of the travertine. To connect plastic sheets, use the painter’s tape to secure areas such as baseboards, cabinets or wall transitions.
Consider using a pH-neutral purifier designed explicitly for delicate travertine to clean the surface with a clean rag. Stretch the travertine surface using a specially built travertine stone chemical stripper. Use a paintbrush roller to apply the stripper to the travertine surface. Enable the stripper to sit on the stone up to two hours according to the kit instructions.
Scrub the surface with a clean mop and spray. Rinse two or three times until the stripper is gone to clean the travertine surface. Attach the repair unit to the steam cleaner and glide over the entire surface of the travertine. Further heat can raise froth and scratches on the stripped and natural stone.
Use a spray bottle to spray the travertine surface with water. Apply a travertine polish powder coat to the surface of the travertine. When required to produce a milky colour, add more water. Put on the natural hair pad and tweak the stone surface to the desired level of polish. Rinse the travertine with a clean mop and water to clean up excess polishing paint.
Source: tiledoctorsa.co.za
Dampen a spray bottle on the travertine surface with water. Wet the surface of the stone with an impressive travertine sealing kit. Cover the whole surface and do not leave a dry area. Leave the travertine sealer on the surface, normally 30 minutes, according to the manufacturer’s stated time. Sprinkle the stone surface with the travertine sealer again and smoothly apply it.
Experts say that you need to service residential floors every 12 to 18 months depending on the amount of foot traffic, while commercial floors are subject to more regular maintenance. Consider the particular finish when cleaning as travertine is versatile and has several different finishes. Experts like Sartunia Travertini will advise on the best way to restore damaged travertine surfaces and provide the most successful floor restoration solution. Routine scheduled maintenance services help in keeping the bodies in top form and play a significant role in the prevention of damages in areas with heavy traffic. These routines ensure the travertine looks its best always.
Conclusion
If your travertine surface damages, do not be quick to toss it away without consulting stone experts. Involving a professional in the field can save you a considerable amount of money through restoration.
